Alarms
Troubleshooting
Screen Errors
- Low Battery
- Program Nearly Complete
- Pump Paused Too Long
- End Battery
- End Program
- Syringe Displaced, Check Syringe
- Occlusion Check Line & Syringe
Technical problem/error and failure identification
Two examples of system failure screen messages are shown here:
|
|
The pump alarms if an internal system fault has been detected and the unit will be inoperative.
- Power the pump off and then power on again
- If the problem cannot be rectified, power off the pump and remove from patient use.
Follow local policy and/or contact your authorised Medical Engineering Department for advice if necessary. (If possible, record the code number and a summary of the fault).
NOTE: Screen information is representative only Refer to Operating Manual for details on Keypad Lock